Description of components of hot cutting bag making machine

The hot cutting Bag Making Machine is mainly composed of material storage device, stepping device, frequency conversion device, whole bag device, heat sealing cutter and control device. The main feature is that the material storage device stores the corresponding amount of raw materials, the stepping device drives the raw materials, the frequency conversion device drives the heat sealing cutter, the whole bag device completes the whole bag after producing a fixed number of bags, the heat sealing cutter controls its temperature through the temperature controller to seal and cut the raw materials, and the control device coordinates all aspects of action as a whole.
The frequency converter is imported. The imported inverter has the functions of automatic torque compensation, slip compensation and automatic voltage stabilization. In the case of frequent start and stop of the motor, it can effectively protect the motor, avoid the impact of starting current on the grid, and can effectively achieve energy saving.
The main control methods are as follows:
1. Turn on the discharging switch, and store the quantitative materials by photoelectric control of the motor.
2. Turn on the heating control switch and heat the hot knife through the temperature controller.
3. The step motor drives the raw material action, and the white bag sealing and cutting is to determine the fixed step number of the step motor to stop to realize the fixed length control; The color bag sealing and cutting is realized by stopping the stepper motor when the corresponding signal is detected by the detection eye.
4. After the step motor stops, the three-phase asynchronous motor drives the hot knife to seal.
5. When the number of bags is set, the whole bag is cut.